Virginia's Trusted Shed Dealer
Shed Permits & HOA Approval in The Fan, Virginia
From storage sheds to backyard offices, The Fan residents need to comply with the City of Richmond zoning and building codes. Most small sheds don’t require a building permit — but there’s more to it than that.
Why The Fan Permit Rules Matter
Permit and zoning rules exist to protect homeowners — including you. the City of Richmond requires zoning compliance for all sheds, and many neighborhoods have HOA architectural standards on top of that. An unpermitted or unapproved shed can mean fines, forced relocation, or title issues at resale.
Permit & Approval Requirements
Building Permit
When you need one
Sheds over 256 sq ft, more than one story, or with electrical/plumbing/HVAC require a building permit through the City of Richmond. Apply at https://www.rva.gov/planning-development-review/permits-and-inspections
No Permit Needed
When you’re exempt
Detached, one-story sheds ≤256 sq ft used for storage or as playhouses are exempt from building permits under the Virginia USBC. You still must meet zoning setbacks.
HOA Approval
If you’re in a community
If your The Fan neighborhood has a homeowners association, you’ll need architectural review board (ARB) approval before installing a shed. Submit plot plan, specifications, and color samples. Allow 2–4 weeks for review.
Under 256 sq ft — No Utilities
Exempt from building permit
A 10×16 (160 sq ft) or 12×20 (240 sq ft) storage shed with no electricity fits here. No building permit needed — but confirm your lot’s zoning setbacks with the City of Richmond. If you’re in an HOA, you still need ARB approval.
Over 256 sq ft
Building permit required
A 14×20 (280 sq ft) workshop or 12×24 (288 sq ft) garage exceeds the threshold. Apply through the City of Richmond with a site plan and construction documents.
Any Size with Electrical
Electrical permit always required
Adding a subpanel, outlets, or lighting to any shed — even a 10×12 — requires an electrical permit from the City of Richmond. This is separate from the building permit. Trenching for underground electrical typically adds $1,500–$3,500.
Finished Interior (Office, She Shed)
Multiple permits likely needed
A shed with insulation, drywall, HVAC, and electrical is a finished space. You’ll need building, electrical, and mechanical permits from the City of Richmond regardless of square footage. The 256 sq ft exemption applies to unfinished storage sheds only.
The Fan Setback & Zoning Rules
Setbacks in The Fan are governed by the City of Richmond zoning ordinances. Requirements vary by zoning district.
- Front yard: Accessory structures typically not permitted in front yard
- Side setback: 5–10 feet from property line (varies by zoning district)
- Rear setback: 5–10 feet from property line (varies by zoning district)
- Corner lots: Larger setbacks on street-facing side
- Height: Per zoning district; confirm with the City of Richmond
Fee info: **contact**: the City of Richmond Building Department — https://www.rva.gov/planning-development-review/permits-and-inspections
Contact: the City of Richmond Building Department — https://www.rva.gov/planning-development-review/permits-and-inspections
How Evergreen Sheds Makes The Fan Permits & HOA Approval Easy
- ✓ Free color matching — we match your home’s exact siding and shingle colors
- ✓ Complete HOA submission package — manufacturer spec sheets, color swatches, elevations
- ✓ Plot plan assistance — help measuring setbacks and documenting compliance
- ✓ We know the City of Richmond permit requirements inside and out
- ✓ ARB communication support — technical documentation for board questions
- ✓ Permit application guidance — we walk you through the the City of Richmond process
Frequently Asked Questions
Q: I want a 10×16 shed with no electricity. Do I need a permit in The Fan?
No building permit needed — it’s 160 sq ft, well under the 256 sq ft threshold. But you must comply with the City of Richmond zoning setbacks. If you’re in an HOA, you need their approval too.
Q: What about a 12×24 workshop with electrical?
You’ll need a building permit (288 sq ft exceeds 256) AND a separate electrical permit through the City of Richmond.
Q: How close to my property line can my shed be?
Depends on your zoning district — typically 5–10 feet in the City of Richmond. Contact the building department to confirm your specific setbacks.
Q: Does my HOA approval replace the Richmond permit?
No. HOA approval covers your community’s design standards. the City of Richmond permits cover building code and zoning. You may need both.
Q: How long does the permit process take in The Fan?
Simple residential shed permits are often processed within a few days. HOA review typically takes 2–4 weeks. Plan for both timelines.
Shed Permits Near The Fan
Three Chopt · Westhampton · Regency · Staples Mill · Hungary Creek · Deep Run · Pemberton · Twin Hickory
Ready to Add a Shed in The Fan?
Share your address and HOA (if any), and we’ll confirm permit requirements, match colors to your home, and provide everything you need for approval. Free estimate, no pressure.